Best free data recovery software: This tutorial is aimed at all those who own a Android TV box fitted with a Rockchip processor. This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Rockchip Android Tool v1.37 is a small application for windows computer created by Rockchip Mobile Inc, which allows you to flash the stock firmware on Android tablets, e-books and MID devices based on Rockchips (RK2818, RK2808A, RK2918, RK3066, RK3188, RK3288 and etc.) device. Rockchip provides 2 tools to update the flash: RkBatchTool – Used to upgrade firmware with a single file; RkAndroidTool – Used to flash the NAND flash with image corresponding to particular partition, e.g. Kernel.img, boot.img. Rockchip has provided tools for upgrading within Linux (closed source) since Android 4.4. It's called upgradetool. It supports update.img, parameter, bootloader and other partitions, and it's command line based. Rkflashkit is an open source GUI version flashing tool for rockchip devices.
Rockchip Provide Tools for Upgrade firmware to on board storage media like eMMC/NAND/SPI flash.
Rockchip Sd Firmware Tool V1.43
Sep 26, 2014 Steps to use Rockchip android Flashing tools – i) Download Android ADB driver and install it. Ii) Download and extract Rockchip tool on PC. Iii) Open RKBatchtool.exe from extracted file. Apowersoft screen recorder for windows 10 download. Iv) After launching the interface of Rockchip tool. V) Now click on the box and add file inside the firmware. After it, Loading of firmware starts. Rockchip Batch Tool v1.7 is a small application for windows computer created by KS Rockchip Mobile Inc, which allows you to flash the stock fimwware on rockchip based device. Rockchip Batch Tool v1.7 is a very useful tool if you want to upgrade the software or completely replace it with a newer version.
Download the Proper Flashing Tool: RK3066 (Dual-Core) Firmware Image Flashing: English RKbatch Tool v1.5; RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6.
Jun 19, 2018 BTW, if you need, you can download Rockchip Batch Tool v1.8 from here and Rockchip FactoryTool v5.0 from here. If you need a tool like this for Allwinner devices then download PhoenixCard v3.1.0 from here. Rockchip Create Upgrade Disk Tool v1.46 helps you to install firmware on Rockchip device from Micro SD card. May 15, 2020 RockChip Batch Tool is a software application that helps you flash firmware on the RockChip chipset powered devices (RK2918, RK3066, RK3188).On this page, we are bringing you the latest version of the RockChip Batch Tool along with the previous versions.
Rockchip Create Upgrade Disk Tool V1.4 Helps You To Install .
Rockchip Firmware Flashing Guide Using Factory Tool
Please chose a appropriate tool for your project.
Download Rockchip Factory Tool (all Versions) - Rockchip .
| Tool Name | Owner | OSS | Description |
| Upgrade_tool | Rockchip | N | Rockchip official release with in SDK, Linux vesion |
| rkdeveloptool | Rockchip | Y | open source version of upgrade_tool |
| rkflashtool | Community | Y | open source, maintained by third party |
| Android Tool | Rockchip | N | official release within SDK, Windows Only |
Rockchip Firmware Factory Tool
If you are using a SD card for firmware storage, then you don't need the Tool for firmware upgrade, for example, you can use 'dd' command in Linux OS.
Rockchip Firmware Factory Tool
Upgrade Guide can help you to reflash your device based on different RK SoCs
This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.
BEFORE START
What do you need:
- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)
The first thing you need is to download the archive with firmware. Inside archive, you find:
- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image
INSTALLING DRIVERS
Launch RK DriverAssitant and press “Install Driver”
Apply all changes and warnings during installation until finishing message
CONNECTING TO PC
Run Batch tool or Android tool on your host PC.
In order to connect device with Host PC and run bootloader mode you should perform following steps:
1. Plug off device power adaptor.
2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.
3. Run Batch tool or RK Android tool
4. Hold the hardware recovery button.
5. Plug in power adaptor and Turn on device if not turning on automatically.
Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.
RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.
IF YOU USE ANDROID TOOL:
In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “
Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.
For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)
Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.
3. Then choose one of configurations files:
config.cfg - if want flash only Android
config_dualboot.cfg - if want flash dualboot
config_linux.cfg - if want flash only linux
3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.
Travis scott rodeo zip. IF YOU USE BATCH TOOL:
Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.
Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.
OTG usb ports and recovery buttons on Ugoos devices:
Ugoos UT4/UT3+/UT6
Recovery button and USB OTG port is on the right side
Ugoos UT3/UT3s (old version)
Recovery button and USB OTG port is on the right side
Flash Tool For Android
Ugoos UM3/UM4
Recovery button is from the left to antenna connector
OTG USB port is left one.
Ugoos UT5 Pro
Ugoos UM2
Ugoos UT2
Ugoos UT1
Rockchip Flash Tool 1.37 Download
Find us: